Materials for the Production of Egoza Super Razor Wire
Razor wire Egoza Super is designed to reliably ensure the safety of the facility during a long service life. In order to prevent the destruction of the security barrier based on https://egoza.net.ua/systems/barriers/monobasic-wire Egoza Super razor wire after a long period of operation under the influence of moisture and other factors leading to the destruction of the metal base of Egoza barbed wire, it is necessary to approach the choice of materials for the manufacture of razor tape and razor wire, which are the basis of the perimeter protection system, with extreme responsibility.
Rolled steel for the production of Egoza Super razor tape
All materials used in the manufacture of razor tape must comply with the requirements of standards and specifications. For the production of Egoza Super razor tape, it is recommended to use the following materials:
- corrosion-resistant, heat-resistant and heat-resistant thin sheet steel according to GOST 7350-77
- galvanized thin sheet steel according to GOST 14918
- cold-rolled tape made of corrosion-resistant and heat-resistant steel according to GOST 4986-79
The thickness of the steel used for the production of Egoza Super razor tape should be between 0.5 and 0.7 mm.
Wire for reinforcing Egoza Super razor tape
Steel wire https://inoxsteel.com.ua/information/stainless-wire, which is used to reinforce the razor tape, is designed to ensure the proper strength of the razor wire and give it a spring property. For the production of Egoza Super razor wire, the following types of steel spring or rope wire are recommended.
- Galvanized rope wire GOST 7372-79
- Galvanized steel wire GOST 9850-72
Anti-corrosion coating of materials
Since Egoza razor wire https://barbed-wire.kz/ru is designed for long-term use outdoors, and, as a result, the wire will be exposed to atmospheric influences, special attention should be paid to the anti-corrosion protection of materials. Both steel tape and steel wire must have a high-quality zinc anti-corrosion coating. The surface of the material must not have cracks, delaminations or areas without anti-corrosion coating.